COLD SHUT DOWN (if screen is frozen)
Hold the volume and power buttons down for approximately 10 seconds. This shuts the computer off, and you should be able to restart it as normal, by holding the power button down for about 3 seconds.
Card Processing.
The integrated MSR is not used for payment card processing. It is only used for gift cards and driver's license age verification.
SmartDock Printer
Port: COM:4
Data Rate: 9600
Data Bits: 8
Stop Bits: 1
Parity: None
Ignore CTS: YES
Ignore DSR: YES
Print Character Width: 42
Ticket Entry Screen
The tablet has a native resolution of 1280 x 800. If you wish to make the fonts and buttons in ticket Entry appear bigger use the Intel HD Graphics Control Panel app and set tablet screen resolution to 1024 x 768 and set scaling to "Scale Full Screen".
If you don't like those settings for all apps the Intel software makes it easy to save profiles for different purposes.
At native res 1280 x 800, the Ticket Entry screen is 6 ¾ inches wide.
At 1024 x 768 it is 7 inches and at 1024 x 768 with Intel panel fit set to scale full screen it is 8.5 inches wide.
Use the Honeywell EzConfig software to configure the scanner.
Scanner Programming Scenarios
|
Use settings below to match your needs. Make sure all scanners treat the various code types the same.
-Scenario 1 (Recommended for use with Acme Bar Code Detective and most other situations)
The following codes will program the scanner to expand UPC-E to UPC-A. All 12 digits of UPC-A will be sent into Acme.
Use Honeywell N431X User's Guide. Print pages 6-34, 6-35, 6-40. Scan the following codes
~UPADFT. (UPC-A to default settings)
~UPEDFT. (UPC-E to default settings)
~UPEEXP1. (UPC-E Expand)
-Scenario 2
The following codes will program the scanner to expand UPC-E to UPC-A, and it will reduce the expanded (and regular) UPC-A to 10 digits, by stripping off the number system (leftmost digit) and the check digit (rightmost digit).
Use Honeywell N431X User's Guide. Print pages 6-34, 6-35, 6-40. Scan the following codes
~UPADFT. (UPC-A to default settings)
~UPANSX0. (number digit off)
~UPACKX0. (check digit off)
~UPEDFT. (UPC-E to default settings)
~UPEEXP1. (UPC-E Expand)
-Scenario 3
The following codes will program the scanner to expand UPC-E to UPC-A, and it will reduce the expanded (and regular) UPC-A to 11 digits, by stripping off the number system digit. The check digit (rightmost digit) is transmitted..
Use Honeywell N431X User's Guide. Print pages 6-34, 6-35, 6-40. Scan the following codes
~UPADFT. (UPC-A to default settings)
~UPANSX0. (number digit off)
~UPEDFT. (UPC-E to default settings)
~UPEEXP1. (UPC-E Expand)
